This is a CarPlay Smart Box suitable for MMI platform.
It is currently compatible with the following models:
And for other Audi C6 MMI 3G head unit models, please contact us.
The detailed steps are as following:
1.Disassemble glove box carefully.
2.Connect with Smart Box kit gateway cable.
3.Remove out MMI head unit.
4.Take out 48 pin harness and LVDS cable.
5.Take out AUX adapter from 48pin harness(Green one).
6.And then convert with Smart Box AUX cable.
7.Then connect to AUDIO-OUT from Smart Box power cable.
8.Original LVDS cable connect to LCD_OUT.
9.LVDS-IN connect to LVDS port behind head unit.
10.Through cables to glove box position.
11.Connect MMI cable(blue) with an extension cable.
12.Connect it to No.10 from harness.
13.Peel out No.10 cable.
14.Then connect with MMI extension cable.
15.Assemble back harness and head unit.
16.Connect all cables with Smart Box box.
19.USB cable for wired connection and future update.
20.Setup dip switch according installation diagram.
21.Sort out all cables and locate Smart Box box at good position.
22.Assemble back glove box.
23.All job done.
NOTE:If your Media have AMI input but NO AUX option, need get an AMI-AUX cable plug to your original AMI port(3.5 jack side no need connect anything). Then will get AUX external option.